MODE=INACTIVE_NO_PULL_DO, ADMODE=ANALOG_INPUT_MODE, OD=STANDARD_GPIO_OUTPUT, HYS=DISABLE, FUNC=PIO
I/O configuration for pin PIO1_4/AD5/CT32B1_MAT3
| FUNC | Selects pin function. This pin functions as WAKEUP pin if the LPC13xx is in Deep power-down mode regardless of the value of FUNC. All other values are reserved. 0 (PIO): Selects function PIO1_4. 1 (AD5): Selects function AD5. 2 (CT3): Selects function CT32B1_MAT3. |
| MODE | Selects function mode (on-chip pull-up/pull-down resistor control) 0 (INACTIVE_NO_PULL_DO): Inactive (no pull-down/pull-up resistor enabled) 1 (PULL_DOWN_RESISTOR_E): Pull-down resistor enabled 2 (PULL_UP_RESISTOR_ENA): Pull-up resistor enabled 3 (REPEATER_MODE): Repeater mode |
| HYS | Hysteresis 0 (DISABLE): Disable 1 (ENABLE): Enable |
| RESERVED | Reserved |
| ADMODE | Selects Analog/Digital mode 0 (ANALOG_INPUT_MODE): Analog input mode 1 (DIGITAL_FUNCTIONAL_M): Digital functional mode |
| RESERVED | Reserved |
| OD | Selects pseudo open-drain mode. 0 (STANDARD_GPIO_OUTPUT): Standard GPIO output 1 (OPEN_DRAIN_OUTPUT): Open-drain output |
| RESERVED | Reserved |